 |
So I'm having problems finding a couple parts that are in orange in the picture attached to this post. Essentially I am trying to re-purpose a portable 4 oz propane tank to store CO2 for a device. CO2 (at 15 psi gauge) is put into the system through the GasPro quick disconnect valve, goes through a one way valve (allowing CO2 to enter but not exit through this inlet) and then goes into a Y splitter and into the 4 oz propane tank. Once the device has been disconnected the 1 way valve should hold the CO2 in the system as the gas is periodically let out through the solenoid valve that is connected to the y splitter attached to the tank. I have the quick disconnect, propane tank and solenoid valve, along with the 1/4" pvc flexible tubing, but I still need to a 1 way valve and a splitter that can attach to the propane tank. If you could help me find these parts or have suggestions on the design that would be greatly appreciated! [link] [comments] |
from The ME Hang Out https://ift.tt/2KHg33Q https://ift.tt/2KGRbcx
Comments
Post a Comment